The Enermax iVektor.Q is the new the compact version of the popular iVektor gaming case. The Midi-Tower, with its racing design, is equipped with a LED temperature display for monitoring the internal temperature and is cooled by a 12-cm TB Apollish with patented circular LED light in the front and a 12-cm rear fan with 3-pin connector and the speed of both fans can be controlled by a switch on the front panel. The tinted acrylic side window provides a clear view on powerful hardware configurations. iVektor.Q has three 5.25”, three 3.5” and four 2.5” drive bays. The upper HDD cage is removable, so that more space for graphics cards with extra length is granted (up to max. 390 mm) and the airflow of fresh air can be improved. A 2.5” disk (HDD / SSD) can then be mounted on the bottom of the case. The Extruded side panels facilitate the hidden cable routing behind the mainboard tray and the installation of tower CPU coolers up to 173 millimeters in height. iVektor.Q supports motherboards in ATX and Micro-ATX format (mATX / uATX).

• iVektor.Q – Little Speedster
  Compact chassis with racing-inspired design for small gaming systems supporting ATX and micro-ATX mainboards. Black coated interior.
• Tinted Acrylic Window
  To attract envious eyes on high-end hardware and stylish systems.

• Comfortable Cooling System
  One 12cm LED front fan and one 12cm rear fan included. Upgradable with one additionally 12cm fan in the top.
• 3-step Speed Control
  RPM control of the integrated 12cm LED front fan and the 12cm rear fan. The speed can be controlled in three steps with a switch in the front of the case.
• Temperature Display
  Display in the front for additional control of the internal temperature, measured by an internal and versatile sensor.

• Multi-GPU Support
  Six extension card slots allow for the installation of two or maximum three graphics cards.
• Full Gaming Power
  Removable upper 2.5” HDD/SSD cage clears the space for longer high-end graphics cards with up to 390mm length.
• Supported Mainboard Sizes
  The iVektor.Q supports ATX and micro-ATX (mATX/µATX) mainboards. Pre-assembled mainboard spacers for easy installation.

• SSD ready!
  Three 2.5” trays inside the upper HDD/SSD cage. One 2.5” HDD/SSD can be installed in the bottom of the case inside the 3.5” HDD cage.
• Ultra High-speed Data Transfer
  One USB 3.0 interfaces on the front panel for a lightning-fast data transfer with up to 5 Gb/sec.
• Easy Accessible Front Interfaces
  1x USB 3.0, 1x USB 2.0 and audio I/O

• Extruded Side Panels
  More space for high tower CPU coolers and for a comfortable hidden cable routing behind the mainboard tray due to extruded side panel.
• Optimal Dust Protection
  Anti-dust filters behind the mesh front and at the bottom of the case.
• Quick and User-friendly System Installation
  Screwless quick release fasteners for ODD and HDD, thumb screws for side panels, cut-out for comfortable CPU cooler mounting and pre-assembled mainboard spacers.
• Bottom-Mounted PSU
  Comfortable cable routing and optimized cooling performance thanks to bottom-mounted power supply. With anti-vibration rubber pads and cleanable dust filter at the bottom of the case.